Featuring various CPU options for a range of performance needs, and combined with an engagig aesthetic: a spectrum of stylish colors, the Posinno Series. Poindus POSINNO Series 450 All-In-One POS System Touchscreen.

HP Part Number: FK225AA. 1x HP POS Pole Display (LD220-HP / FK225AA). This is a genuine HP POS Pole Display, designed. Other USB-compatible POS systems (driver/ software dependent). Pole assembly. Colour: Black (blue-green VFD text).

The Gryphon 4500 omnidirectional imager provides snappy reading performance on all common 1D and 2D codes. Datalogic’s Motionix motion-sensing technology enables the scanner to intuitively switch into hand held mode when the device is picked up.

The Paylink by Money Controls If you have a PC or any other computer and want to connect it to money handling equipment, such as bill validators, recyclers, coin acceptors and hoppers, then you really need to take a long, hard look at the Paylink system.Simply put, you will have no peripheral interface software to write. An ordinary developer with no peripheral experience will be up-and-running with your chosen peripheral set in less than half a day.In order to use money handling peripherals, you need to have a handler which is required to implement a serial communications handler, sometimes using RS232, but also proprietary electronic systems such as MDB or cctalk. This handler has to implement a protocol, which is described in a protocol definition document for the particular device, in order to control the peripheral device and monitor what is happening.Paylink is not just a Milan Interface unit, which could be replaced by a simple “level shifter” providing the electronic RS232, ccTalk or MDB interface. This would still leave your software team to write these communications protocols. The Paylink System is much more than that; containing as it does a wide range of mature, thoroughly tested protocol handlers which means it offers unparalleled ease of connectivity for peripherals from a wide range of manufacturers.The Paylink product runs on any computer, it is not limited to being used with PCs. As well as the full support provided for Windows systems, Paylink is fully supported on and runs happily with any system running a modern Linux distro, including products such as the Raspberry Pi.Paylink supports many protocols from many manufacturers; the following table will give you an idea of the breadth of the facilities: Protocol Typical Manufacturers cctalkCrane PI (MEI, Money Controls, NRI), Innovative Technology, JCM, ICT, Azkoyen.Paylink fully supports the bill recycler BNV and DES standards for maximum security. EBDSCrane PI (MEI) SC Range of bill acceptors and recyclers, including the very latest SCR/MDR recycler. CCNetCrane PI (CashCode) B2B300, B2B100 and B2B60 ID003JCM iPro / Vega acceptor & recycler, and similar products from many others Direct USBMost Crane PI products for coin and bill recycling. MDBCoin and Note acceptors / recyclers from MEI, NRI, CoinCo MDBCredit / Debit card acceptance devices, such as those from Nayax, OTI and CPI F56 / F53FujitsuBut that’s not the full story. If you change manufacturer allegiance, add peripherals or have different build variants, then your application does not need to change at all. Paylink simply accepts the newly connected peripheral set and presents them all to the application through the same high-level, device-independent interface.And the Paylink code base has now been evolving for a full fifteen years. It is completely stable and reliable and new devices are being supported with every passing year.You want to upgrade a bill validator to a bill recycler alongside your coin handling system? With Paylink it could not be easier. Simply disconnect your bill validator and connect your recycler. Note dispensing becomes seamlessly added to coin dispensing with no change to your application.You need have no worry about Paylink being “here today, gone tomorrow”. Besides being a product with 15 years of history, Paylink is manufactured, sold and supported on our behalf by the worldwide payment peripheral manufacturer Crane Payment Innovations.WE SHIP ALL ORDERS FROM OUR BASE IN MANCHESTER UK VIA UPS NEXT DAY DELIVERY.

1x RFD8500. This RFID scanner has Bluetooth connectivity, allowing for seamless and efficient data transmission.

Excellent stand for SumUp Air card reader. It has a cutout for USB cable, so you can always keep you SumUp charged. Can be used of any flat surface and allow easy removal of the device. Stand is 3D printed from PLA plastic, which is biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, cassava roots, chips or starch, or sugarcane. In 2010, PLA had the second highest consumption volume of any bioplastic of the world. By using on of these you support environmentally friendly business. Please note that this listing is only for stand, the SumUp Air isn’t included. Shipping will be tracked, delivery to Europe takes around 2-10 days, rest of the world – 7-20 days.

Manufacturer: Zebra Technologies. • Zebra Technologies. Display: 4.3″ WVGA Touchscreen. ✔ Device Repairs. In addition to hardware sales, we also provide • Toshiba TEC. • Datalogic. • Honeywell.

***** PLEASE NOTE: The card reader is IS NOT included ***** *** Please be aware that during the current outbreak we will aim to continue to dispatch orders on time, however Royal Mail and other delivery services are under extreme pressure and deliveries may be delayed due to matters beyond our control. Please consider this before contacting us for support *** This is a white wall mounted, secure box / enclosure for the new Sumup Solo card reader. This allows contactless, and chip-and-pin card payments to be taken while the card machine is securely attached to a wall. The enclosure can be screwed to any solid surface, and the lid is secured with 2 hex screws using the provided hex key. The charging port and power button are accessible through the holes in the enclosure – and the holes can be closed off with the supplied covers if access is not required. The USB port can alternatively be used permanently using an angled USB cable routed through the rear of the enclosure and passed through a hole in the wall. We can supply a good quality-right angled USB-C cable if required for an additional £5 if ordered at the same time as the enclosure – please choose the appropriate option when ordering. This enclosure is not available anywhere else. Designed and 3d printed exclusively by 3dbitz in either naturally sourced, plant based, biodegradable and compostable bio-plastic known as PLA, or optionally PETG which has a higher temperature resistance and may be more suited to use in higher-temperature environments such as inside a car. Please see our other listings for the black version of the same item. Other colours are also available on request – please message before ordering a colour other than black or white, or in an alternative material to confirm alternative availability and lead time. 3dbitz is not associated in any way with Sumup, this is a cost-effective, alternative, unofficial stand. ***** PLEASE NOTE: The card reader IS NOT included *****

Connectivity: RJ11 Cable. Keys: 2 x Included. Size: 46 x 14.5 x 46.5 cm. One Opened For Photos, The One You Receive Will Be Sealed. Coin Slots: 8.